Not meant to be pretty, just do a faster and better job than i

Paper Jogger

canada goose outlet nyc Here’s a good example of avoiding something because you are vastly over thinking it. I’m writing this in case someone else wants a small occasional use paper jogger. My “proof of concept” prototype works so well that I’m perfectly happy with it as is. It isn’t pretty, but sure works well. And it is very simple. canada goose outlet nyc

canada goose outlet new york I buy canada goose jacket cheap do canada goose store volunteer work for a local organization. I save the office paper that canada goose gets put out uk canada goose for recycling, remove staples and separate out Canada Goose online the pages that were printed double sided. Then I pad it together Canada Goose Jackets using white Elmer’s glue and a drop or two of food coloring (to make it pretty). I cut the padded 8.5 X 11 sheets into quarters (using a bandsaw) to make scratch pads. canada goose factory sale This happens about every 6 to 8 months and I’ll have a stash of paper about 8 inches tall. canada goose outlet new york

canada goose outlet las vegas It is a noticeable pain to try to get the edges of paper to line up evenly. I’ve looked at paper joggers on line, and the new ones as well as the used are just too expensive for my limited needs. I downloaded and read paper jogger manuals, and they seemed complicated for what they did. No where could I find anything on a home made/shop built paper jogger. I finally decided I didn’t have that much to lose. And that is what this Instructable is all about. On eBay I saw these pneumatic vibrators for under $20. Ordered one and hooked it up to air and was impressed. Doesn’t take all that much air and it sure does vibrate a lot. Not terribly noisy. canada goose coats The picture above is representative of the one I purchased. The thing on the top left is some sort of quick connect for 1/8″ airline (I think). It buy canada goose jacket didn’t get used in this project. The thing on the top right is a muffler for the exhaust side. I kept it. canada goose outlet las vegas

canada goose outlet uk sale What canada goose uk outlet I purchased is a “Industrial type Pneumatic compressed air power turbine wheel type vibrator GT 8″. There are dozens of sellers selling these. I suspect they are all the same within the size specified. I use 1/4″ connectors and the ports on this are 1/8”. A scrap of plywood made the “tray” to hold the paper. No specific dimensions, just large enough to readily hold the 8.5 X 11 paper I’m working with. Screwed and glued together like a drawer missing a side and the front. I honestly didn’t expect this to work and didn’t take any pictures of the cutting and assembly. It is just a simple 3 sided “box” or tray. It’s little more than a metal box with toothed gear (the turbine) with offset weights mounted inside it. The air coming in pushes against the gear teeth causing it to spin and the offset weights make it vibrate. I knew I wanted to jog the paper in line with the tray, so I mounted the vibrator on what then became the end of the tray. I put it there to give me clearance for the air connection. Basically said “that looks like a good place”, drilled for 1/4″ flathead screws (2 canada goose outlet of ’em) and bolted in on. Let the screw heads countersink themselves in the plywood. I don’t believe there is anything critical here or anywhere else on this thing. I had a foot operated valve from another tool and used it. Turned out to be a good choice. These are pretty inexpensive off eBay, the “Foot Pedal Control Valve 2 Position 3 Port 1/4″ NPT Air Pneumatic Switch” going for under $20 should work well. This frees up both hands and also allows you to regulate the pressure and therefore canadian goose jacket the vibrations per minute. Various jogger manufactures talk about their vibrations per minute and the numbers they give seem to be all over the place. This was one Canada Goose Online of canada goose clearance sale my big concerns, but that doesn’t seem to be an issue. This little vibrator is supposedly putting out around 46,000 vibrations per minute at 87 PSI. Vibration isolators are kind of pricey and I just didn’t want to invest any more than necessary. I got my prototype to the point the pictures show and gave it a try with no mounting of any sort and it works just great as is. The paper just sort of slides into alignment with the other sheets. It wants to canada goose clearance go jittering off the canada goose black friday sale table top, but with both hands free, I can keep it in place and maybe poke the cheap canada goose uk reluctant sheet of paper into place with a finger. This all takes place in a matter of seconds, so it isn’t a matter of standing there and waiting. and waiting. canada goose outlet uk sale

canada goose outlet online uk The picture above is padding the paper. Elmer’s glue with a couple drops of food coloring and canada goose uk black friday brushed Canada Goose sale on. 2 coats. I inserted cardboard cheap Canada Goose into the paper stack to give backs to the pads. canada goose outlet online uk

canada goose outlet black friday What I was after was function. Not meant to be pretty, just do a faster and better job than i could do by hand. And those requirements are satisfied. I may cut down the overall height of this. What’s there isn’t a problem, but it would make lifting the paper off easier. The video shown has a sort of “corral” I made to free up my hand for the camera. Canada Goose Parka The thing wants to move in the direction of the vibrator and away from uk canada goose outlet the edge of the canada goose uk shop table, probably because the top hangs over in that direction. Ideas or suggestions are welcomed. I hope this Canada Goose Coats On Sale saves someone else from procrastinating over whether or not is is possible to build a paper jogger. It’s a piece of cake canada goose outlet black friday.


Please enter your comment!
Please enter your name here